the principle of voltage division of capacitive vo-九游会ag

the capacitor divider consists of a porcelain sleeve and a plurality of series capacitors mounted therein. the porcelain sleeve is filled with insulating oil maintaining a positive pressure of 0.1 mpa, and a steel bellows is used to balance different environments to maintain oil pressure. the capacitor partial pressure can be used as a coupling capacitor. connect the carrier device. capacitive voltage transformers are mainly composed of a capacitor divider and a medium voltage transformer. the medium voltage transformer consists of a transformer installed in the sealed oil tank, a compensating reactor and a damping device, and the space at the top of the fuel tank is filled with nitrogen. the primary winding is divided into a main winding and a fine-tuning winding, and a low-loss reactor is connected in series between the primary side and the primary winding. since the nonlinear impedance and inherent capacitance of the capacitive voltage transformer sometimes cause ferromagnetic resonance in the capacitive voltage transformer, the damping device is used to suppress the resonance. the damping device is composed of a resistor and a reactor, and is connected across the secondary winding. above, under normal circumstances, the damping device has a high impedance. when the ferromagnetic resonance causes an overvoltage, before the medium voltage transformer is affected, the reactor is saturated and only the resistive load is left, so that the oscillation energy is quickly reduced. a capacitive voltage transformer is a voltage transformer that draws a voltage from a series capacitor and then transforms it into a voltage source such as a meter or a relay protection. the capacitive voltage transformer can also couple the carrier frequency to the power line for long distance. communication, remote measurement, selective line high frequency protection, remote control, teletype and so on. therefore, compared with the conventional electromagnetic voltage transformer, the capacitive voltage transformer has many advantages in economy and safety in addition to preventing ferromagnetic resonance due to saturation of the voltage transformer core.

dongguan meizhi's newly developed capacitive voltage transformer has reached the top level in the industry, with accuracy of 0.5%, high temperature resistance (-40°c~ 150°c), high pressure resistance (42kv in air), zero partial discharge, greatly increasing mutual inductance. service life and grid safety. welcome new and old customers to call: 15728120255